Java开发网 |
注册 |
登录 |
帮助 |
搜索 |
排行榜 |
发帖统计
|
您没有登录 |
» Java开发网 » Web Server & Linux
打印话题 寄给朋友 订阅主题 |
作者 | CentOS Linux解决Device eth0 does not seem to be present |
阿熊
阿熊 元老 发贴: 5644 |
于 2016-01-19 22:21
在VMware里克隆出来的CentOS Linux。。 ifconfig...没有看到eth0.。然后重启网卡又报下面错误。 故障现象: service network restart Shutting down loopback insterface: [ OK ] Bringing up loopback insterface: [ OK ] Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED] 解决办法: 首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示: # vi /etc/udev/rules.d/70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x1022:0x2000 (pcnet32) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9 7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x1022:0x2000 (pcnet32) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1 7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" 记录下,eth1网卡的mac地址00:0c:29:50:bd:17 接下来,打开/etc/sysconfig/network-scripts/ifcfg-eth0 # vi /etc/sysconfig/network-scripts/ifcfg-eth0 将 DEVICE="eth0" 改成 DEVICE="eth1" , 将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17" 最后,重启网络 # service network restart 或者 # /etc/init.d/network restart 正常了。 SWT Designer v1.2.3 Released! |
话题树型展开 |
人气 | 标题 | 作者 | 字数 | 发贴时间 |
11413 | CentOS Linux解决Device eth0 does not seem to be present | 阿熊 | 1569 | 2016-01-19 22:21 |
已读帖子 新的帖子 被删除的帖子 |
Powered by Jute Powerful Forum® Version Jute 1.5.6 Ent Copyright © 2002-2021 Cjsdn Team. All Righits Reserved. 闽ICP备05005120号-1 客服电话 18559299278 客服信箱 714923@qq.com 客服QQ 714923 |