Java开发网 - sybase配置

Java开发网

您没有登录

» Java开发网 » Database/JDBC/SQL/JDO/Hibernate » Sybase

打印话题 寄给朋友 订阅主题

作者

sybase配置

hzxl

发贴: 169
积分: 40

于 2003-08-31 21:30

sybase配置

u 配置SYBASE服务器
1. 为SYBASE SERVER创建所需的设备
建议将sybase server的数据库设备创建在裸设备上，因此，在系统中创建以下逻辑卷：
lvname=master,size=100M
lvname=sybproc,size=100M
lvname=sybsystem,size=100M Start

修改对应设备文件权限：
# chown sybase:sybase /dev/master /dev/rmaster
# chown sybase:sybase /dev/sybproc /dev/rsybproc
# chown sybase:sybase /dev/sybsystem /dev/rsybsystem Start

# chmod 600 /dev/master /dev/rmaster /dev/sybproc /dev/rsybproc
# chmod 600 /dev/sybsystem /dev/rsybsystem Start

2. 设置系统环境
共享内存要求
Platform Number of 2K Pages Amount of Memory
HP/UX 9,000 18 MB
IBM RS/6000 9,000 18 MB
修改系统共享内存。
异步I/O要求
n IBM AIX
激活异步I/O。
# smitty chgaio
如果系统同时有多于7个磁盘使用异步I/O，对于每个设备将参数MAXIMUM加1。
SMIT Parameters Entry Boxes for AIX 4.1.2
MINIMUM number of servers 1
MAXIMUM number of servers 10
MAXIMUM number of REQUESTS I/O 4096
Server PRIORITY 39
ASYNC I/O STATE to be configured at system restart available

n HP
使用SAM。
# sam
->Kernel Configuration menu
---->Drivers
修改 Pending State for asyncdisk为 In.
---->Actions menu --> rebuild the kernel--> reboot the system.
由于启动Adaptive Server和 Backup Server的用户sybase必须是 /dev/async的属主，执行以下命令：
# /etc/mknod /dev/async c 101 4
# chmod 0660 /dev/async
# chown sybase /dev/async
修改系统参数(SCO OPEN SERVER only)
# vi /etc/conf/cf.d/stune
加入以下行：
SHMMAX XXXXXXXX (XXXXXXXX为最大共享内存，如64M为67108864)
NFILE 3000
NOFILES 1024

# vi /etc/conf/sdevice.d/aio
将”N”改为”Y”。
# vi /etc/conf/sdevice.d/suds
将”N”改为”Y”。
# /etc/conf/cf.d/link_unix
重链核心。
# vi /etc/rc2
加入行：
/etc/suds_ctrl -a sybase组id号

# shutdown -y -i0 -g0 重新开机
修改sybase用户的.profile
编辑/sybase/.profile文件，如下：
SYBASE=/sybase
DSQUERY=ABIS_SERV
PATH=$PATH:.:.$SYBASE/bin Embaressed

SYBASE/install
LIBPATH=$SYBASE/lib
export SYBASE DSQUERY PATH LIBPATH
也可以将这些环境变量的设置放在系统的环境设置文件中（如AIX的/etc/environment）。
3. 创建SYBASE SERVER
对于SCO OPEN SERVER下的SQL Server的创建，参见附录。
假设SERVER名为ABIS_SERV。
以sybase用户登录，或
# su – sybase
$ cd init
$ cd sample_resource_files
$ cp srvbuild.adaptive_server.rs /sybase/ABIS_SERV.rs
$ cp srvbuild.backup_servers.rs /sybase/ABIS_SERV_backup.rs
$ cd
修改资源定义文件
$ vi ABIS_SERV.rs
sybinit.release_directory: /sybase
sybinit.product: sqlsrv
sqlsrv.server_name: ABIS_SERV
sqlsrv.new_config: yes
sqlsrv.do_add_server: yes
sqlsrv.network_protocol_list: tcp
sqlsrv.network_hostname_list: PUT_YOUR_HOSTNAME_HERE
sqlsrv.network_port_list: PUT_YOUR_PORT_NUMBER_HERE
sqlsrv.master_device_physical_name:/dev/rmaster
sqlsrv.master_device_size: 100
sqlsrv.master_database_size: USE_DEFAULT
sqlsrv.errorlog: USE_DEFAULT
sqlsrv.do_upgrade: no
sqlsrv.sybsystemprocs_device_physical_name: /dev/rsybproc
sqlsrv.sybsystemprocs_device_size: 100
sqlsrv.sybsystemprocs_database_size: USE_DEFAULT
sqlsrv.sybsystemdb_device_physical_name: /dev/rsybsystem Start

sqlsrv.sybsystemdb_device_size: 100 Start

sqlsrv.sybsystemdb_database_size: USE_DEFAULT Start

sqlsrv.default_backup_server: ABIS_SERV_backup
~
~
如果不使用两阶段提交(2pc)，可以不创建名为sybsystem的逻辑卷，同时删除以上文件中最后标有 Start

的三行。
$ vi ABIS_SERV_backup.rs
sybinit.release_directory: /sybase
sybinit.product: bsrv
bsrv.server_name: ABIS_SERV_backup
bsrv.do_add_backup_server: yes
bsrv.network_protocol_list: tcp
bsrv.network_hostname_list: PUT_YOUR_HOSTNAME_HERE
bsrv.network_port_list: PUT_YOUR_PORT_NUMBER_HERE
bsrv.language: USE_DEFAULT
bsrv.character_set: USE_DEFAULT
bsrv.tape_config_file: USE_DEFAULT
bsrv.errorlog: USE_DEFAULT
~
~
~
$ srvbuildres –r ABIS_SERV.rs
$ srvbuildres –r ABIS_SERV_backup.rs
如果是在HP-UX上，缺省的字符集roman8，通过以下方法改为iso_1。
$ cd /sybase
$ cp init/sample_resource_files/sqlloc.rs sqlloc.rs
$ vi sqlloc.rs
sybinit.release_directory: USE_DEFAULT
sqlsrv.server_name: ABIS_SERV
sqlsrv.sa_login: sa
sqlsrv.sa_password:
sqlsrv.default_language: us_english
sqlsrv.language_install_list: USE_DEFAULT
sqlsrv.language_remove_list: USE_DEFAULT
sqlsrv.default_characterset: iso_1
sqlsrv.characterset_install_list: USE_DEFAULT
sqlsrv.characterset_remove_list: USE_DEFAULT
sqlsrv.sort_order: binary
$ sqllocres –r sqlloc.rs

4. 配置SYBASE SERVER
$ isql -Usa
Password:
1>select @@version
2>go
1>alter database master on master=25 扩大MASTER数据库
2>go
1>sp_helpdb
查看数据库信息
2>go
1>sp_addserver "SYB_BACKUP",null,"ABIS_SERV_backup"
建立BACKUPSERVER与DBSERVER的连接
2>go
1>sp_addserver “ABIS_SERV”,local
2>go
命名本服务器，需重启server
1>sp_helpserver
2>go
1>sp_configure "total memory",358400
为SYBASE指定其使用的内存(700M)，需重启动server
2>go
1>sp_configure "user connections",100
SYBASE可使用的用户连接
2>go
1>sp_password NULL,”new_sa_password” 修改sa口令
2>go
1>sp_diskdefault master,defaultoff 修改master设备的缺省状态
2>go
1>shutdown SYB_BACKUP
必须先shutdown BACKUP server
2>go
1>shutdown
然后shutdown DB server
2>go
5. 启动SYBASE SERVER
# su – sybase
$ cd install
$ startserver -f RUN_ABIS_SERV 启动server
$ showserver 对应每个CPU有一个dataserver进程
$ startserver -f RUN_ABIS_SERV_backup 启动backup-server
6. 作系统数据库备份
isql -Usa
1>dump database master to "/sybase/install/master.dump"
2>go
1>dump database sybsystemprocs to "/sybase/install/sybprocs.dump"
2>go
1>quit
7. 修改配置文件(Server)
$ cd /sybase
$ vi ABIS_SERV.cfg 该文件是该服务器的所有配置信息，可以直接修改此文件。
修改配置文件后，最好使用以下命令进行检验修改是否正确：
$ isql –Usa –SABIS_SERV –P
1>sp_configure "configuration file", 0,verify,"/sybase/ABIS_SERV.cfg"
2>go
(return status = 0)
1>quit
8. 修改配置文件(Client)
根据需要，可能需要修改Open Client的某些配置文件，才能正常使用应用程序。
可能需要修改的有：
l $SYBASE/config/libtcl.cfg
注释掉所有段如[drivers],[directory],[security]内的所有行。
l $SYBASE/config/ocs.cfg
添加对应的server需要的段。
l $SYBASE/locales/locales.dat
根据应用使用的LANG添加或修改对应该OS的段，对应该LANG的行的值。

u 附录
1. 在DS(DATA-SERVER)上安装的产品及顺序
1. Adattive Server Enterprise 11.9.2
2. All Server product Patch

2. 在AS(APPLATION-SERVER)上安装的产品及顺序
1. ESQL/C
2. Open Client/Server C
3. XA Library for CICS
4. All Client products patchs

3. 在BS(DS+AS)上安装的产品及顺序
1. ESQL/C
2. Open Client/Server C
3. XA Library for CICS
4. All Client product patchs
5. Adative Server Enterprise 11.9.2
6. All Server product Patch
7. other patchs
4. 在SCO OPENSERVER上安装的产品及顺序
1. SQL Server 11.0.3
2. Open Client/Server C 10.0.4
3. ESQL/C 10.0.4
4. SQL Server patch and OCS patch
5. 在SCO OPENSERVER上创建SQL Server
l 以用户sybase登录，运行$SYBASE/install/sybinit。
$ install/sybinit
The log file for this session is '/sybase/init/logs/log0510.001'.

SYBINIT

1. Release directory: /sybase

2. Edit / View Interfaces File

3. Configure a Server product
4. Configure an Open Client/Server product

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 2
l 确认Release directory是正确的。
l 先配置server需要的interfaces项。
INTERFACES FILE TOP SCREEN

Interfaces File:

1. Add a new entry
2. Modify an existing entry
3. View an existing entry
4. Delete an existing entry

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 1

CREATE NEW INTERFACES FILE ENTRY

1. Server name:

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 1
Enter the name of the server to add (default is '):MYSERV

CREATE NEW INTERFACES FILE ENTRY

1. Server name: MYSERV

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return:

SERVER INTERFACES FILE ENTRY SCREEN

Server name: MYSERV

1. Retry Count: 0
2. Retry Delay: 0

3. Add a new listener service

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 3

EDIT TCP SERVICE

1. Hostname/Address: caiabc.nabc.com
2. Port:
3. Name Alias:

4. Delete this service from the interfaces entry

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 1
Enter the hostname or Internet address to use for this entry (default is 'caiabc
.nabc.com'):localhost

EDIT TCP SERVICE

1. Hostname/Address: localhost
2. Port:
3. Name Alias:

4. Delete this service from the interfaces entry

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 2
Enter the port number to use for this entry (default is '):2888

EDIT TCP SERVICE

1. Hostname/Address: localhost
2. Port: 2888
3. Name Alias:

4. Delete this service from the interfaces entry

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return:
Is this information correct? y

SERVER INTERFACES FILE ENTRY SCREEN

Server name: MYSERV

1. Retry Count: 0
2. Retry Delay: 0

3. Add a new listener service

Modify or delete a service

Listener services available:

Protocol Address Port Name Alias
4. tcp localhost 2888

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return:
Write the changes to the interfaces file now? y

l 创建新的Server

SYBINIT

1. Release directory: /sybase

2. Edit / View Interfaces File

3. Configure a Server product
4. Configure an Open Client/Server product

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 3

CONFIGURE SERVER PRODUCTS

Products:

Product Date Installed Date Configured
1. SQL Server Oct 18 1996 22:07
2. Backup Server Oct 18 1996 22:07

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 1

NEW OR EXISTING SQL SERVER

1. Configure a new SQL Server
2. Configure an existing SQL Server
3. Upgrade an existing SQL Server

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 1

ADD NEW SQL SERVER

1. SQL Server name: SYBASE

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 1
Enter the name of the new SQL Server (default is 'SYBASE'):MYSERV

ADD NEW SQL SERVER

1. SQL Server name: MYSERV

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return:

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Incomplete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Incomplete
4. SET ERRORLOG LOCATION Incomplete
5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete
7. CONFIGURE CHARACTER SETS Incomplete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 2

MASTER DEVICE CONFIGURATION

1. Master Device: /sybase/master.dat

2. Size (Meg): 21

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 1
Enter the pathname of the SQL Server's master device (default is '/sybase/master.dat'):/sybase/install/master.dat

WARNING: '/sybase/install/master.dat' is a regular file which is not recommended for a Server device.
Press <return> to continue.

MASTER DEVICE CONFIGURATION

1. Master Device: /sybase/install/master.dat
2. Size (Meg): 21

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 2
Enter the size of the SQL Server's master device in megabytes:
50

MASTER DEVICE CONFIGURATION

1. Master Device: /sybase/install/master.dat

2. Size (Meg): 50

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return:

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Incomplete
4. SET ERRORLOG LOCATION Incomplete
5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete
7. CONFIGURE CHARACTER SETS Incomplete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 3

SYBSYSTEMPROCS DATABASE CONFIGURATION

1. sybsystemprocs database size (Meg): 16
2. sybsystemprocs logical device name: sysprocsdev
3. create new device for the sybsystemprocs database: yes
4. physical name of new device: /sybase/sybprocs.dat
5. size of the new device (Meg): 16

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 4
Enter the physical device name for the sybsystemprocs database :
/sybase/install/sybprocs.dat

SYBSYSTEMPROCS DATABASE CONFIGURATION

1. sybsystemprocs database size (Meg): 16
2. sybsystemprocs logical device name: sysprocsdev
3. create new device for the sybsystemprocs database: yes
4. physical name of new device: /sybase/install/sybprocs.dat
5. size of the new device (Meg): 16

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return:

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Incomplete
5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete
7. CONFIGURE CHARACTER SETS Incomplete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return: 4

SET ERRORLOG LOCATION

1. SQL Server errorlog: /sybase/install/errorlog

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return:

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Complete
5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete
7. CONFIGURE CHARACTER SETS Incomplete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 5

SET THE SQL SERVER'S BACKUP SERVER

1. SQL Server Backup Server name: SYB_BACKUP

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return:

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Complete
5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Incomplete
7. CONFIGURE CHARACTER SETS Incomplete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 6

CONFIGURE LANGUAGES

Current default language: us_english
Current default character set: ISO 8859-1 (Latin-1) - Western European 8-bit character set.
Current sort order: Binary ordering, for the ISO 8859/1 or Latin-1 character(iso_1).

Select the language you want to install, remove, or designate as the default language.
Language Installed? Remove Install Make default
1. us_english yes no no yes

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return:

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Complete
5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Complete
7. CONFIGURE CHARACTER SETS Incomplete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 7

CONFIGURE CHARACTER SETS

Current default language: us_english
Current default character set: ISO 8859-1 (Latin-1) - Western European 8-b character set.
Current sort order: Binary ordering, for the ISO 8859/1 or Latin-1 charact(iso_1).

Select the character set you want to install, remove, or designate as the defaulset.aracter

Character set Installed? Remove Install Make default
1. ASCII, for use with unsp yes no no no
2. Code Page 437, (United S no no no no
3. Code Page 850 (Multiling no no no no
4. ISO 8859-1 (Latin-1) - W yes no no yes
5. Macintosh default charac no no no no
6. Hewlett-Packard propriet no no no no

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return:

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Complete
5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Complete
7. CONFIGURE CHARACTER SETS Complete
8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 8

CONFIGURE SORT ORDER

Current default language: us_english
Current default character set: ISO 8859-1 (Latin-1) - Western European 8-bcharacter set.
Current sort order: Binary ordering, for the ISO 8859/1 or Latin-1 charact(iso_1).

Select a sort order.

Sort Order Chosen
1. Binary ordering, for the ISO 8859/1 or Latin-1 character set (is yes
2. General purpose dictionary ordering. no
3. Spanish dictionary ordering. no
4. Spanish case and accent insensitive dictionary order. no
5. Spanish case insensitive dictionary order. no
6. Dictionary order, case insensitive, accent insensitive. no
7. Dictionary order, case insensitive. no
8. Dictionary order, case insensitive with preference. no

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Complete
5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Complete
7. CONFIGURE CHARACTER SETS Complete
8. CONFIGURE SORT ORDER Complete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return: 9

ACTIVATE AUDITING

1. Install auditing: no
2. sybsecurity database size (Meg): 5
3. sybsecurity logical device name: sybsecurity
4. create new device for the sybsecurity database: no

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return:

SQL SERVER CONFIGURATION
SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete
2. MASTER DEVICE CONFIGURATION Complete
3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete
4. SET ERRORLOG LOCATION Complete
5. CONFIGURE DEFAULT BACKUP SERVER Complete
6. CONFIGURE LANGUAGES Complete
7. CONFIGURE CHARACTER SETS Complete
8. CONFIGURE SORT ORDER Complete
9. ACTIVATE AUDITING Complete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.
Enter the number of your choice and press return:

Execute the SQL Server Configuration now? y

WARNING: '/sybase/install/master.dat' is a regular file which is not recommended
for a Server device.
Press <return> to continue.
Running task: create the master device.
Building the master device
.Done
Task succeeded: create the master device.
Running task: update the SQL Server runserver file.
Task succeeded: update the SQL Server runserver file.
Running task: boot the SQL Server.
waiting for server 'MYSERV' to boot...
Task succeeded: boot the SQL Server.
Running task: create the sybsystemprocs database.
sybsystemprocs database created.
Task succeeded: create the sybsystemprocs database.
Running task: install system stored procedures.
.....................................................................................................................Done
Task succeeded: install system stored procedures.
Running task: set permissions for the 'model' database.
Done
Task succeeded: set permissions for the 'model' database.
Running task: set the default character set and/or default sort order for the SQL Server.
Setting the default character set to iso_1
Sort order 'binary' has already been installed.
Character set 'iso_1' is already the default.
Sort order 'binary' is already the default.
Task succeeded: set the default character set and/or default sort order for the
SQL Server.
Running task: set the default language.
Setting the default language to us_english
Language 'us_english' is already the default.
Task succeeded: set the default language.

Configuration completed successfully.
Press <return> to continue.

l 相同的方法配置BACKUP Server

hzxl edited on 2003-09-01 15:54

话题树型展开

人气	标题	作者	字数	发贴时间
8157	sybase配置	hzxl	21542	2003-08-31 21:30

已读帖子

新的帖子

被删除的帖子